Asus G1-P5G43 Manuel d'utilisateur télécharger pdf (Page 66)

5-12 Chapter 5: BIOS setup

The following item appears only when you installed an Intel

CPU that supports

the Enhanced Intel

SpeedStep

Technology (EIST).

Execute-Disable Bit Capability [Enabled]

Allows you to enable or disable the No-Execution Page Protection Technology.

Setting this item to [Disabled] forces the XD feature ag to always return to zero

(0). Conguration options: [Disabled] [Enabled]

Intel(R) SpeedStep(TM) Tech [Enabled]

Allows you to use the Enhanced Intel

SpeedStep

Technology. When set to

[Enabled], you can adjust the system power settings in the operating system to

use the EIST feature. Set this item to [Disabled] if you do not want to use the EIST.

Conguration options: [Enabled] [Disabled]

5.4.2 Chipset

The Chipset menu allows you to change the advanced chipset settings. Select an

item then press <Enter> to display the submenu.

North Bridge Conguration

Memory Remap Feature [Enabled]

Allows you to enabled or disable the remapping of the overlapped PCI memory

above the total physical memory. Enable this option only when you install 64-bit

operating system. Conguration options: [Disabled] [Enabled]

Congure DRAM Timing by SPD [Enabled]

Allows you to enable or disable conguring the DRAM Timing by SPD.

Conguration options: [Enabled] [Disabled]

Initiate Graphic Adapter [PEG/PCI]

Allows you to decide which graphics controller to use as the primary boot device.

Conguration options: [IGD] [PCI/IGD] [PCI/PEG] [PCG/IGD [PEG/PCI]

CPU TM function [Enabled]

Enables or disables Intel

CPU Thermal Monitor (TM) function, a CPU overheating

protection function. When enabled, the CPU core frequency and voltage are

reduced when the CPU overheats. Conguration options: [Disabled] [Enabled]

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 77 78

Pas de commentaire

Asus G1-P5G43 Manuel d'utilisateur Page 66