Asus G1-P5G43 Manuel d'utilisateur télécharger pdf (Page 57)

ASUS G1-P5G43 5-3

Updating from a BIOS file

a. Select Update BIOS from a le, then click Next.

b. Locate the BIOS le from the Open window, then click Open.

3. Follow the onscreen instructions to complete the updating process.

5.1.2 ASUS EZ Flash 2 utility

The ASUS EZ Flash 2 feature allows you to update the BIOS without using an

OS-based utility.

To update the BIOS using EZ Flash 2:

1. Insert the USB ash disk that contains the latest BIOS le to the USB port,

then launch EZ Flash 2 in any of these two ways:

• Press <Alt> + <F2> during POST.

• Enter the BIOS setup program. Go to the Tools menu to select EZ Flash

2 and press <Enter> to enable it.

Press <Tab> to switch between drives until the correct BIOS le is

found.

ASUSTek EZ Flash 2 BIOS ROM Utility V3.36

Current ROM

Update ROM

Note

FLASH TYPE: WOINBOND W25X80

PATH: A:\

BOARD: P5QL-VM EPU

VER: 0206 (H;00 B:02)

DATE: 07/10/2009

BOARD: Unknown

VER: Unknown

DATE: Unknown

[Enter] Select or Load [Tab] Switch [V] Drive Info

[Up/Down/Home/End] Move [B] Backup [ESC] Exit

4. When the correct BIOS le is found, EZ Flash 2 performs the BIOS update

process and automatically reboots the system when done.

• Only a USB ash disk with FAT 32/16 format and single partition can

support the ASUS EZ Flash 2 utility.

• Do not shut down or reset the system while updating the BIOS to prevent

system boot failure!

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 77 78

Pas de commentaire

Asus G1-P5G43 Manuel d'utilisateur Page 57