Asus TS100-E5/PI4 Manuel d'utilisateur télécharger pdf (Page 44)

Chapter 3: Motherboard information3-4

P5BV-C/4L/TS100-E5

Clear RTC RAM

CLRTC1

Normal

(Default)

Clear RTC

1 2

2 3

3.2 Jumpers

1. Clear RTC RAM (CLRTC1)

This jumper allows you to clear the Real Time Clock (RTC) RAM in

CMOS. You can clear the CMOS memory of date, time, and system setup

parameters by erasing the CMOS RTC RAM data. The onboard button

cell battery powers the RAM data in CMOS, which include system setup

information such as system passwords.

If the steps above do not help, remove the onboard battery and move the

jumper again to clear the CMOS RTC RAM data. After the CMOS clearance,

reinstall the battery.

Except when clearing the RTC RAM, never remove the cap on CLRTC jumper

default position. Removing the cap will cause system boot failure!

To erase the RTC RAM:

1. Turn OFF the computer and unplug the power cord.

2. Move the jumper cap from pins 1–2 (default) to pins 2–3. Keep the cap

on pins 2–3 for about 5–10 seconds, then move the cap back to pins

1–2.

3. Plug the power cord and turn ON the computer.

4. Hold down the <Del> key during the boot process and enter BIOS setup

to re-enter data.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 165 166

Pas de commentaire

Asus TS100-E5/PI4 Manuel d'utilisateur Page 44