Asus TXP4 Manuel d'utilisateur télécharger pdf (Page 22)

22 ASUS TXP4 User’s Manual

III. INSTALLATION

(Expansion Cards)

III. INSTALLATION

4. Expansion Cards

First read your expansion card documentation for hardware and

software settings that may be required to set up your specific card.

Expansion Card Installation Procedure

1. Read the documentation for your expansion card.

2. Set any necessary jumpers on your expansion card.

3. Remove your computer system’s cover.

4. Remove the bracket on the slot you intend to use. Keep the bracket for possible

future use.

5. Carefully align the card’s connectors and press firmly.

6. Secure the card on the slot with the screw you removed in step 4.

7. Replace the computer system’s cover.

8. Set up the BIOS if necessary (such as IRQ xx Used By ISA: Yes in PNP AND

PCI SETUP)

9. Install the necessary software drivers for your expansion card.

Assigning IRQs for Expansion Cards

Some expansion cards need to use an IRQ to operate. Generally an IRQ must be

exclusively assigned to one use. In a standard design there are 16 IRQs available but

most of them are already in use, leaving 6 IRQs free for expansion cards.

WARNING! Unplug your power supply when adding or removing expansion

cards or other system components. Failure to do so may cause severe damage to

both your motherboard and expansion cards.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 59 60

Pas de commentaire

Asus TXP4 Manuel d'utilisateur Page 22