Asus TXP4 Manuel d'utilisateur télécharger pdf (Page 25)

ASUS TXP4 User’s Manual 25

III. INSTALLATION

(Connectors)

III. INSTALLATION

3. Parallel Port Connector (26 Pin Block)

This connector supports the included parallel port ribbon cable with mounting

bracket. Connect the ribbon cable to this connection and mount the bracket to

the case on an open slot. You can make available the parallel port and choose the

IRQ through the Onboard Parallel Port in Chipset Features of the BIOS SOFT-

WARE. (Pin 26 is removed to prevent inserting in the wrong orientation

when using ribbon cables with pin 26 plugged).

Parallel Port Connector

For the parallel port connector to be available,

you must connect the included parallel (25-pin

female) cable set to a free expansion slot

opening.

TIP: You may also remove the bracket

connectors and mount them directly to the

case to save expansion slot space.

Orient the red stripe to Pin 1

Pin 1

4. Serial Port COM1 & COM2 Connectors (Two 10-pin blocks)

These connectors support the provided serial port ribbon cables with mounting

bracket. Connect the ribbon cables to these connectors and mount the bracket to

the case on an open slot. You can make available the parallel port and choose the

IRQ through the Onboard Serial Port in Chipset Features of the BIOS SOFT-

WARE. (Pin 10 is removed to prevent inserting in the wrong orientation

when using ribbon cables with pin 10 plugged).

Serial Port Connectors

For these connectors to be available,

you must connect the included serial

cable set from COM1 (using the 9-pin

male) & COM2 (using the 25-pin male)

to a free expansion slot opening.

TIP: You may also remove the bracket

connectors and mount them directly to

the case to save expansion slot space.

COM 2

Pin 1

COM 1

Pin 1

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 59 60

Pas de commentaire

Asus TXP4 Manuel d'utilisateur Page 25