Asus V2-PH1 Manuel d'utilisateur télécharger pdf (Page 7)

Quick installation guideQuick installation guide

Quick installation guide

English

Installing the CPU fan and heatsink assembly

The Intel

Pentium

4/Intel

Pentium

D LGA775 processor requires a

specially designed heatsink and fan assembly to ensure optimum thermal

condition and performance.

• When you buy a boxed Intel

Pentium

4 processor, the package

includes the CPU fan and heatsink assembly. If you buy a CPU

separately, make sure that you use only Intel

-certified

multi-directional heatsink and fan.

• Your Intel

Pentium

4 LGA775 heatsink and fan assembly comes in

a push-pin design and requires no tool to install.

If you purchased a separate CPU heatsink and fan assembly, make sure

that a Thermal Interface Material is properly applied to the CPU heatsink

or CPU before you install the heatsink and fan assembly.

To install the CPU heatsink and fan:

1. Place the heatsink on top of the

installed CPU, making sure that

the four fasteners match the

holes on the motherboard.

3. When the fan and heatsink assembly is in place, connect the CPU fan

cable to the connector on the motherboard.

2. Push down two fasteners at a

time in a diagonal sequence to

secure the heatsink and fan

assembly in place.

Do not forget to connect the CPU fan connector! Hardware monitoring

errors can occur if you fail to plug this connector.

1 2 3 4 5 6 7 8 9 10 11 12 ... 99 100

Pas de commentaire

Asus V2-PH1 Manuel d'utilisateur Page 7