Asus V2-PH1 Manuel d'utilisateur télécharger pdf (Page 4)

Quick installation guideQuick installation guide

Quick installation guide

English

Removing the side cover and

front panel assembly

1. Remove the cover screws on the rear panel.

2. Pull the side cover toward the rear panel until its hooks disengage

from the chassis tab holes. Set the side cover aside.

3. Locate the front panel assembly hooks, then lift them until they

disengage from the chassis.

4. Swing the front panel assembly to the right, until the hinge-like tabs

on the right side of the assembly are exposed.

5. Remove the front panel assembly, then set aside.

Installing a CPU

Air ductAir duct

Air duct

• Your boxed Intel

Pentium

4 LGA775 processor package should

come with installation instructions for the CPU, heatsink, and the

retention mechanism. If the instructions in this section do not match

the CPU documentation, follow the latter.

•

Check your motherboard to make sure that the PnP cap is on the

CPU socket and the socket contacts are not bent. Contact your

retailer immediately if the PnP cap is missing, or if you see any

damage to the PnP cap/socket contacts/motherboard components.

ASUS will shoulder the cost of repair only if the damage is shipment/

transit-related.

•

Keep the cap after installing the motherboard. ASUS will process

Return Merchandise Authorization (RMA) requests only if the

motherboard comes with the cap on the LGA775 socket.

• The product warranty does not cover damage to the socket

contacts resulting from incorrect CPU installation/removal, or

misplacement/loss/incorrect removal of the PnP cap.

Chassis tab holesChassis tab holes

Chassis tab holes

1 2 3 4 5 6 7 8 9 ... 99 100

Pas de commentaire

Asus V2-PH1 Manuel d'utilisateur Page 4