Asus M4N68T V2 Manuel d'utilisateur télécharger pdf (Page 41)

ASUS M4N68T V2 Series 2-3

• This function supports USB ash disks with FAT 32/16 format and single partition only.

• DO NOT shut down or reset the system while updating the BIOS to prevent system boot

failure!

2.1.3 ASUS CrashFree BIOS 3

ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS le

when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS

le using the motherboard support DVD or a USB ash drive that contains the BIOS le.

• Before using this utility, rename the BIOS le in the USB ash drive into

M4N68TV2.ROM (for M4N68T V2) or M468LEV2.ROM (for M4N68T LE V2).

• Download the latest BIOS le from the ASUS website at www.asus.com.

Recovering the BIOS

To recover the BIOS:

1. Turn on the system.

2. Insert the support DVD to the optical drive or the removable device that contains the

BIOS le to the USB port or to the oppy disk drive, if supported.

3. The utility automatically checks the devices for the BIOS le. When found, the utility

reads the BIOS le and starts ashing the corrupted BIOS le.

4. Turn off the system after the utility completes the updating process and turn on again.

DO NOT shut down or reset the system while updating the BIOS! Doing so can cause

system boot failure!

Ensure to load the BIOS default settings to ensure system compatibility and stability. Select

the Load Setup Defaults item under the Exit menu. Refer to section 2.8 Exit menu for

details.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 61 62

Pas de commentaire

Asus M4N68T V2 Manuel d'utilisateur Page 41