Asus DS300f Spécifications télécharger pdf (Page 43)

DS300f G2 Series User Manual

acceSSInG the mac aDDreSS In the clu

To access the MAC address in the CLU:

1. At the CLI command prompt, type menu and press Enter.

The CLU screen appears.

2. Highlight Network Management and press Enter.

3. Highlight IPv4 and press Enter.

The following information displays:

Active Controller Id: 1 Port Id : 1

Max Supported Speed : 1000Mbps Link Status : Up

Protocol Family : IPv4

Status : Enabled

MAC Address : 00:01:55:61:18:65

DHCP : Disabled

IP Address : 10.0.0.1

Subnet Mask : 0.0.0.0

Gateway IP Address : 0.0.0.0

DNS Server IP Address : 0.0.0.0

settInG-up asus ds300f G2 wIth the ClI

Setting up the ASUS DS300f G2 in the CLI includes these actions:

• "Making Subsystem Date and Time Settings" on page 37

• "Virtual Management Port Settings" on page 38

•

"MakingVirtualManagementPortSettings–Automatically"onpage38

• "MakingVirtualManagementPortSettings–ManuallyunderIPv4"onpage38

• "MakingVirtualManagementPortSettings–ManuallyunderIPv6"onpage38

• "Maintenance Mode Settings" on page 39

•

"MakingMaintenanceModeSettings–Automatically"onpage39

• "MakingMaintenanceModeSettings–ManuallyunderIPv4"onpage40

• "MakingMaintenanceModeSettings–ManuallyunderIPv6"onpage40

makInG SubSyStem Date anD tIme SettInGS

To set the subsystem date and time:

1. Type date -a mod -d and the date in yyyyy/mm/dd format then press Enter.

administrator@cli> date -a mod -d 2011/03/25

2. Type date -a mod -t and the time in hh:mm:ss format, then press Enter.

administrator@cli> date -a mod -t 14:50:05

You can combine date and time settings, such as:

administrator@cli> date -a mod -d 2011/03/25 -t 14:50:05

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 261 262

Pas de commentaire

Asus DS300f Spécifications Page 43