Asus P4SP-MX SE Manuel d'utilisateur télécharger pdf (Page 45)

ASUS P4SP-MX SE motherboard user guide

2-13

2.3.1 Primary and Secondary Master/Slave

Type [Auto]

Select [Auto] to automatically detect an IDE hard disk drive. If automatic detection

is successful, Setup automatically fills in the correct values for the remaining fields

on this sub-menu. If automatic detection fails, this may be because the hard disk

drive is too old or too new. If the hard disk was formatted on an older system,

Setup may detect incorrect parameters. In these cases, select [User Type HDD] to

manually enter the IDE hard disk drive parameters. Refer to the next section for

details.

[User Type HDD]

Manually enter the number of cylinders, heads and sectors per track for the drive.

Refer to the drive documentation or on the drive label for this information.

Before attempting to configure a hard disk drive, make sure you have the

correct configuration information supplied by the drive manufacturer. Incorrect

settings may cause the system to fail to recognize the installed hard disk.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 63 64

Pas de commentaire

Asus P4SP-MX SE Manuel d'utilisateur Page 45