Asus P4SP-MX SE Manuel d'utilisateur télécharger pdf (Page 19)

ASUS P4SP-MX SE motherboard user guide

1-11

1.7.3 Installing a DIMM

Make sure to unplug the power supply before adding or removing DIMMs or

other system components. Failure to do so may cause severe damage to both

the motherboard and the components.

Follow these steps to install a DIMM.

1. Unlock a DIMM socket by pressing

the retaining clips outward.

2. Align a DIMM on the socket such that

the notch on the DIMM matches the

break on the socket.

1.7.4 Removing a DIMM

Follow these steps to remove a DIMM.

1. Simultaneously press the retaining

clips outward to unlock the DIMM.

3. Firmly insert the DIMM into the socket

until the retaining clips snap back in

place and the DIMM is properly

seated.

Locked Retaining Clip

2. Remove the DIMM from the socket.

Unlocked

retaining clip

DDR DIMM notch

A DDR DIMM is keyed with a

notch so that it fits in only one

direction. DO NOT force a DIMM

into a socket to avoid damaging

the DIMM.

Support the DIMM lightly with your

fingers when pressing the

retaining clips. The DIMM might

get damaged when it flips out with

extra force.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 63 64

Pas de commentaire

Asus P4SP-MX SE Manuel d'utilisateur Page 19