Asus V2-PH1 Manuel d'utilisateur télécharger pdf (Page 8)

Quick installation guideQuick installation guide

Quick installation guide

English

Installing an expansion card

Installing a DIMM

1. Locate the DIMM sockets in the motherboard.

2. Unlock a DIMM socket by pressing the retaining clips outward.

3. Align a DIMM on the socket such that the notch on the DIMM matches

the break on the socket.

4. Push the DIMM to the socket until the retaining clips snap inward.

• Unplug the power supply before adding or removing DIMMs. Failure to

do so may cause damage to the motherboard and/or components.

• A DDR DIMM is keyed with a notch so that it fits in only one direction.

Do not force a DIMM into a socket to avoid damaging the DIMM.

2. Remove the metal bracket

lock.

1. Remove the metal cover

opposite the slot that you

intend to use.

3. Insert the card connector to

the slot, then press the card

firmly until it fits in place.

4. Replace the metal bracket

lock.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 99 100

Pas de commentaire

Asus V2-PH1 Manuel d'utilisateur Page 8