Asus P4P800S-X Guide de l'utilisateur télécharger pdf (Page 61)

ASUS P4P800-VM motherboard user guide

2-21

Allocate IRQ to PCI VGA [Yes]

When set to [Yes], BIOS assigns an IRQ to PCI VGA card if the card requests for

an IRQ. When set to [No], BIOS does not assign an IRQ to the PCI VGA card even

if requested. Configuration options: [No] [Yes]

Pallete Snooping [Disabled]

When set to [Enabled], the pallete snooping feature informs the PCI devices that

an ISA graphics device is installed in the system so that the latter can function

correctly. Setting to [Disabled] deactivates this feature. Configuration options:

[Disabled] [Enabled]

PCI IDE BusMaster [Enabled]

Allows BIOS to use PCI bus mastering when reading/writing to IDE devices.

Configuration options: [Disabled] [Enabled]

IRQ xx [Available]

When set to [Available], the specific IRQ is free for use of PCI/PnP devices. When

set to [Reserved], the IRQ is reserved for legacy ISA devices. Configuration

options: [Available] [Reserved]

DMA Channel xx [Available]

When set to [Available], the specific DMA channel is free for use of PCI/PnP

devices. When set to [Reserved], the DMA channel is reserved for legacy ISA

devices. Configuration options: [Available] [Reserved]

Reserved Memory Size [Disabled]

Sets the size of memory block reserved for legacy ISA devices. Configuration

options: [Disabled] [16K] [32K] [64K]

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 79 80

Pas de commentaire

Asus P4P800S-X Guide de l'utilisateur Page 61