Asus P4P800S-X Guide de l'utilisateur télécharger pdf (Page 16)

1-6

Chapter 1: Product introduction

ATX 12V connector. This power connector connects the 4-pin 12V plug from

the ATX 12V power supply.

CPU socket. A 478-pin surface mount, Zero Insertion Force (ZIF) socket for

the Intel

Pentium

4 Processor, with 800/533/400 MHz system bus that allows

6.4GB/s, 4.3GB/s, and 3.2GB/s data transfer rates, respectively.

North bridge controller. The Intel

865G Graphics Memory Controller Hub

(GMCH) provides the processor interface with 800/533/400 MHz frequency,

system memory interface at 400/333/266MHz operation, and 1.5V AGP

interface that supports AGP 3.0 specification including 8X Fast Write protocol.

The MCH interconnects to the south bridge ICH5 via the Intel

proprietary Hub

Interface.

DDR DIMM sockets. These four 184-pin DIMM sockets support up to 4GB

system memory using unbuffered non-ECC PC3200/2700/2100 DDR DIMMs.

ATX power connector. This 20-pin connector connects to an ATX power

supply. The power supply must have at least 1A on the +5V standby lead

(+5VSB).

Super I/O controller. This Winbond Low Pin Count (LPC) interface provides

the commonly used Super I/O functionality. The chipset supports a high-

performance floppy disk controller for a 360K/720K/1.44M/2.88M floppy disk

drive, a multi-mode parallel port, two standard compatible UARTs, and a Flash

ROM interface. This controller also integrates the ASIC for PC health

monitoring.

Floppy disk connector. This connector accommodates the provided ribbon

cable for the floppy disk drive. One side of the connector is slotted to prevent

incorrect insertion of the floppy disk cable.

IDE connectors. These dual-channel bus master IDE connectors support

Ultra DMA100/66, PIO Modes 3 & 4 IDE devices. Both the primary (blue) and

secondary (black) connectors are slotted to prevent incorrect insertion of the

IDE ribbon cable.

AGP 8X slot. This Accelerated Graphics Port (AGP) slot supports 0.8V/1.5V

AGP 8X mode graphics cards for 3D graphical applications.

Flash ROM. This 4Mb firmware contains the programmable BIOS program.

SATA connectors. These connectors support Serial ATA HDDs and allows

for up to 150MB/s data transfer rate, faster than the standard Parallel ATA

with 133 MB/s.

South bridge controller. The fifth-generation Intel I/O Controller Hub (ICH5)

is a subsystem that integrates various I/O functions including 2-channel

ATA100 bus master IDE controller, up to eight USB 2.0/1.1 ports, I/O APIC,

SMBus 2.0 controller, LPC interface, AC’97 2.2 interface, and PCI 2.2

interface. The ICH5 also contains the necessary arbitration and buffering for

efficient utilization of these interfaces.

Standby power LED. This LED lights up if there is a standby power on the

motherboard. This LED acts as a reminder to turn off the system power before

plugging or unplugging devices.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 79 80

Commentaires sur ces manuels

Pas de commentaire

Asus P4P800S-X Guide de l'utilisateur Page 16

Commentaires sur ces manuels