Asus TS100-E6 PI4 Guide de l'utilisateur télécharger pdf (Page 55)

ASUS TS100-E6/PI4 4-3

3. Press <Tab> to switch between drives until the correct BIOS le is found.

When found, EZ Flash 2 performs the BIOS update process and automatically

reboots the system when done.

• This function can support devices such as a USB ash disk with FAT 32/16

format and single partition only.

• DO NOT shut down or reset the system while updating the BIOS to prevent

system boot failure!

Ensure to load the BIOS default settings to ensure system compatibility and

stability. Select the

Load Setup Defaults

item under the

Exit

menu. See section

4.9 Exit Menu

for details.

4.1.2 BUPDATER utility

The succeeding BIOS screens are for reference only. The actual BIOS screen

displays may not be the same as shown.

The BUPDATER utility allows you to update the BIOS le in DOS environment

using a bootable USB ash disk drive with the updated BIOS le.

UpdatingtheBIOSle

To update the BIOS le using the BUPDATER utility:

1. Visit the ASUS website at www.asus.com and download the latest BIOS le

for the motherboard. Save the BIOS le to a bootable USB ash disk drive.

2. Copy the BUPDATER utility (BUPDATER.exe) from the ASUS support

website at support.asus.com to the bootable USB ash disk drive.

3. Boot the system in DOS mode, then at the prompt, type:

BUPDATER /i[lename].ROM

where [lename] is the latest or the original BIOS le on the bootable USB

ash disk drive, then press <Enter>.

A:\>BUPDATER /i[le name].ROM

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 147 148

Pas de commentaire

Asus TS100-E6 PI4 Guide de l'utilisateur Page 55