Asus TS100-E6 PI4 Guide de l'utilisateur télécharger pdf (Page 28)

Chapter 2: Hardware setup2-10

2.3.3 Installing a DIMM

2.3.4 Removing a DIMM

Follow these steps to remove a DIMM.

1. Simultaneously press the

retaining clips outward to unlock

the DIMM.

2. Remove the DIMM from the socket.

3. Firmly insert the DIMM into the

socket until the retaining clips snap

back in place and the DIMM is

properly seated.

Ensure to unplug the power supply before adding or removing DIMMs or other

system components. Failure to do so may cause severe damage to both the

motherboard and the components.

A DIMM is keyed with a notch so that it ts in only one direction. DO NOT force

a DIMM into a socket to avoid damaging the DIMM.

Unlocked retaining clip

DIMM notch

1. Unlock a DIMM socket by pressing

the retaining clips outward.

2. Align a DIMM on the socket

such that the notch on the DIMM

matches the break on the socket.

Locked Retaining Clip

Support the DIMM lightly with your ngers when pressing the retaining clips.

The DIMM might get damaged when it ips out with extra force.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 147 148

Pas de commentaire

Asus TS100-E6 PI4 Guide de l'utilisateur Page 28