Asus RS926-E7/RS8 Manuel d'utilisateur télécharger pdf (Page 7)

Cache Vault Accessory Kit

2. Align the three screw holes on the

LSI® steel CVPM clip to the three

screw holes on the bracket, and

secure the clip with the bundled

screws (4).

3. Install the Cache Vault Power

Module to the clip and connect the

42’’ cable extender to it.

4. Connect the other end of the 42’’

cable extender to the Cache Vault

Flash Module which is installed on

the PIKE 2208 card.

5. Install the PIKE 2208 card to the

expansion slot, and then install the

bracket to the system as shown.

Wrap the excessive part of the

cable and place it into the gap

beside the PIKE 2208 card.

PIKE 2208 card

For more details on how to uninstall the riser card bracket, refer to the user

manual that came with your server system.

Installing the kit on ESC4000 G2 GPU server system

1. Align the two screws on the side of

the steel CVPM holder installed with

the Cache Vault Power Module to the

screw holes of the full-height steel

bracket. Secure the holder assembly

with the bundled screws (3).

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Pas de commentaire

Asus RS926-E7/RS8 Manuel d'utilisateur Page 7