Asus MES Manuel d'utilisateur télécharger pdf (Page 53)

ASUS MES-VM User’s Manual 53

IV. BIOS SETUP

Menu Item Details

Power (sub-menu 1/2)

Power Up Control

AC PWR Loss Restart: [Disabled]

This allows you to set whether you want your system to boot up after the power has been

interrupted. Disabled leaves your system off after reapplying power and Enabled boots up

your system after reapplying power. The configuration options are: [Disabled] [Enabled].

PWR Up On Modem Act: [Enabled]

This allows either settings of Enabled or Disabled for powering up the computer (turns the

ATX power supply on) when the modem receives a call while the computer is Soft-off.

NOTE: The computer cannot receive or transmit data until the computer and applications are

fully running, thus connection cannot be made on the first try. Turning an external modem off

and then back on while the computer is off causes an initialization string that will also cause the

system to power on. The configuration options are: [Disabled] [Enabled].

Wake On LAN: [Enabled]

Wake-On-LAN allows your computer to be booted from another computer via a net-

work by sending a wake-up frame or signal. With this feature, network administrators

can remotely boot an entire network of computer systems during off-peak hours for

software updating or maintainance. The configuration options are: [Disabled] [Enabled].

IMPORTANT: This feature requires an optional network interface with Wake-On-

LAN and an ATX power supply with at least 720mA +5V standby power.

Automatic Power Up: [Disabled]

This allows automatic system power up. The configuration options are: [Disabled]

[Enabled].

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 63 64

Pas de commentaire

Asus MES Manuel d'utilisateur Page 53