Asus MES Manuel d'utilisateur télécharger pdf (Page 32)

ASUS MES-VM User’s Manual32

IV. BIOS SETUP

Menu Item Details

Managing and Updating Your Motherboard’s BIOS

Upon First Use of the Computer System

1. Create a bootable system floppy disk by typing [FORMAT A:/S] from the DOS

prompt without creating “AUTOEXEC.BAT” and “CONFIG.SYS” files.

2. Copy AFLASH.EXE to the just created boot disk.

3. Run AFLASH.EXE from this new disk and select option 1. Save Current BIOS

to File. See 1. Save Current BIOS To File on the previous page for more details

and the rest of the steps.

Updating BIOS Procedures (only when necessary]

1. Download an updated ASUS BIOS file from the Internet (WWW or FTP) or a

BBS (Bulletin Board Service) (see ASUS CONTACT INFORMATION on page 3

for details) and save to the disk you created earlier.

2. Boot from the disk you created earlier.

3. At the “A:\” prompt, type AFLASH and then press <Enter>.

4. At the Main Menu, type 2 and then press <Enter>. See 2. Update BIOS Includ-

ing Boot Block and ESCD on the previous page for more details and the rest of

the steps.

WARNING! If you encounter problems while updating the new BIOS, DO NOT

turn off your system since this might prevent your system from booting up. Just

repeat the process, and if the problem still persists, update the original BIOS file

you saved to disk above. If the Flash Memory Writer utility was not able to suc-

cessfully update a complete BIOS file, your system may not be able to boot up. If

this happens, your system will need service.

Flash Memory Writer

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 63 64

Pas de commentaire

Asus MES Manuel d'utilisateur Page 32