Asus MES Manuel d'utilisateur télécharger pdf (Page 17)

ASUS MES-VM User’s Manual 17

DIMM Memory Installation

Insert the module(s) as shown. Because the number of pins are different on either

side of the breaks, the module will only fit in the orientation as shown. DIMM

modules are longer and have different pin contact on each side and therefore have a

higher pin density. SIMM modules have the same pin contact on both sides.

MES-VM 168-Pin DIMM Sockets

Lock

88 pins

60 pins

20 pins

Lock

DIMM Socket 1

DIMM Socket 2

The DIMMs must be 3.3V Unbuffered for this motherboard. To determine the DIMM

type, check the notches on the DIMMs (see figure below).

168-Pin DIMM Notch Key Definitions (3.3V)

DRAM Key Position

Voltage Key Position

Unbuffered

RFU

Buffered

Reserved

3.3V

5.0V

The notches on the DIMM module will shift between left, center, or right to identify

the type and also to prevent the wrong type from being inserted into the DIMM slot on

the motherboard. You must ask your retailer the correct DIMM type before purchas-

ing. This motherboard supports four clock signals.

III. HARDWARE SETUP

System Memory

III. H/W SETUP

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 63 64

Pas de commentaire

Asus MES Manuel d'utilisateur Page 17