Asus G71V Manuel d'utilisateur Page 73

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 97
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 72
Appendix A
A-9
System BIOS Settings (cont.)
RAID Function Support (on selected model)
For models support RAID function, you must set the RAID item in the BIOS Setup before you can create
a RAID set from the built-in hard disk drives.
WARNING! Building a RAID set will clear all your data on both the primary disk drive
and the secondary disk drive, including Express Gate. Ensure that you’ve made a
backup before creating a RAID set.
The recovery partition will be deleted after you create a RAID set. You can only install
the system OS with the recovery DVD or a retail OS disc.
Only models with two hard disk drives may support this RAID function.
To enable the RAID function
1 Press <F2> to enter the BIOS Setup during POST
2 Go to the Advanced menu
Intel(R) Matrix Storage Manager option ROM v7.0.0.1020 ICH8M-E
Copyright(C) 2003-07 Intel Corporation. All Rights Reserved.
RAID Volumes:
None dened.
Physical Disks:
Port Drive Model Serial # Size Type/Status(Vol ID)
0 Hitachi HTS72202 02DP0410DTG564WP 186.3GB
Non-RAID Disk
1 Hitachi HTS72202 02DP1400DEG1XRGN 186.3GB
Non-RAID Disk
Press <Ctrl-I> or Enter to Conguration Utility..
3 Set SATA Operation Mode to [RAID]
4� Press <F10> to save the configuration and exit the
BIOS setup
To build a RAID set
1 Restart the system and press <ESC> on bootup
2� Press <Ctrl> + <I> to start the RAID utitliy
Intel(R) Matrix Storage Manager option ROM v7.0.0.1020 ICH8M-E
Copyright(C) 2003-07 Intel Corporation. All Rights Reserved.
[ MAIN MENU ]
1. Create RAID Volume 3. Reset Disks to Non-RAID
[ DISK/VOLUME INFORMATION ]
RAID Volumes:
None dened.
Physical Disks:
Port Drive Model Serial # Size Type/Status(Vol ID)
0 Hitachi HTS72202 02DP0410DTG564WP 186.3GB Non-RAID Disk
1 Hitachi HTS72202 02DP1400DEG1XRGN 186.3GB Non-RAID Disk
[↑↓]-Select [ESC]-Exit [ENTER]-Select Menu
2. Delete RAID Volume 4. Recovery Volume Options
5. Exit
3 Select a desired RAID set to create�
4 Restart the system and reinstall the system OS
IMPORTANT! Select “Reset Disks to Non-RAID” to reset the hard disk drive if you
want to set SATA Operation Mode to [Enhanced] in BIOS or use the hard disk in other
computers, otherwise the hard disk drive will not function normally.
Vue de la page 72
1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 96 97

Commentaires sur ces manuels

Pas de commentaire