Asus EB1007P Manuel d'utilisateur télécharger pdf (Page 32)

32 EB1007P

English

Backing up the Factory Default Environment Data to a

USB Drive (F9 Backup)

1. Repeatsteps1–3intheprevioussection.

2. Select Backup the Factory Environment to a USB Drive and

click Next.

3. Connect a USB storage device to your PC to start the Factory

Default Environment backup.

The required size of the connected USB storage device should be

larger than 20GB. The actual size may vary with your PC model.

4. Select a desired USB storage device if more than one USB

storage device is connected to your PC and click Next.

If there is already a partition with proper size in the selected USB

storage device (for example, a partition that has been used as the

backup partition), the system will show this partiton automatically

and reuse it for backup.

5. Based on the different situations in the previous step, data on

the selected USB storage device or on the selected partition will

be cleared. Click Backup to start backup.

You will lose all your data on the selected USB storage device or

on the selected partition. Ensure to back up your important data

beforehand.

6. When backing up the factory default environment is

successfully completed, click Reboot to restart the system.

1 2 ... 27 28 29 30 31 32 33 34

Pas de commentaire

Asus EB1007P Manuel d'utilisateur Page 32