Asus T2-PH1 Manuel d'utilisateur télécharger pdf (Page 40)

2-202-20

2-20

Chapter 2: Basic installationChapter 2: Basic installation

Chapter 2: Basic installation

Configure your hard disk drive as Master device before connecting the

IDE cable and power plug. Refer to the HDD documentation on how to

set the drive as a Master device.

2.10 Installing a hard disk drive (HDD)

The system supports one Ultra ATA/133 IDE or one Serial ATA hard disk

drive.

To install an IDE hard disk drive:

1. Locate the HDD tray lock screw

on the other side of the chassis.

2. Remove the lock screw with a

Philips screw driver. Keep the

screw for later use.

4. Place a hard disk drive on the

tray with its bottom on the

open side. Align the HDD and

HDD tray screw holes.

5. Secure the HDD with four

screws.

3. Slide the HDD tray outward until

the tray slots are released from

the chassis hooks.

Tray locksTray locks

Tray locks

Tray locksTray locks

Tray locks

Lock slotsLock slots

Lock slots

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 111 112

Pas de commentaire

Asus T2-PH1 Manuel d'utilisateur Page 40