Asus P2B Manuel d'utilisateur télécharger pdf (Page 27)

ASUS P2B User’s Manual 27

III. HARDWARE SETUP

DMA Channels

III. H/W SETUP

Connectors

III. H/W SETUP

3. Parallel Port Connector (25-pin Female)

You can enable the parallel port and choose the IRQ through “Onboard Parallel

Port” in Chipset Features Setup of the BIOS SOFTWARE. NOTE: Serial print-

ers must be connected to the serial port.

Parallel (Printer) Port (25-pin Female)

4. Serial Port COM1 and COM2 Connectors (Two 9-pin Male)

The two serial ports can be used for pointing devices or other serial devices. See

“Onboard Serial Port” in Chipset Features Setup of the BIOS SOFTWARE.

COM 1 COM 2

Serial Ports (9-pin Male)

5. Floppy Disk Drive Connector (34-1pin FLOPPY)

This connector supports the provided floppy disk drive ribbon cable. After con-

necting the single end to the board, connect the two plugs on the other end to the

floppy drives. (Pin 5 is removed to prevent inserting in the wrong orienta-

tion when using ribbon cables with pin 5 plugged).

P2B Floppy Disk Drive Connector

NOTE: Orient the red stripe to Pin 1

Floppy Drive Connector

Pin 1

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 67 68

Pas de commentaire

Asus P2B Manuel d'utilisateur Page 27