Asus AP3000 Manuel d'utilisateur télécharger pdf (Page 62)

ASUS CUSI-M User’s Manual62

4. BIOS SETUP

Slot 1 IRQ, Slot 2 IRQ, Slot3 IRQ [Auto]

These fields set how IRQ use is determined for each PCI slot. The default

setting for each field is [Auto], which utilizes auto-routing to determine

IRQ use. Configuration options: [Auto] [NA] [3] [4] [5] [7] [9] [10] [11]

[12] [14] [15]

PCI/VGA Palette Snoop [Disabled]

Some nonstandard VGA cards, such as graphics accelerators or MPEG video

cards, may not show colors properly. The setting [Enabled] should correct

this problem. Otherwise, leave this on the default setting of [Disabled].

Configuration options: [Disabled] [Enabled]

PCI Latency Timer [32]

Leave on default setting for best performance vs. stability.

SYMBIOS SCSI BIOS [Auto]

[Auto] allows the motherboard’s BIOS to detect whether you have a Symbios

SCSI controller. If the Symbios SCSI controller is detected, the

motherboard’s Symbios BIOS will be enabled; if no Symbios SCSI control-

ler is detected, the onboard Symbios SCSI BIOS will be disabled.

[Disabled] will disable the motherboard’s Symbios SCSI BIOS so that the

BIOS on an add-on Symbios SCSI card can be used. If your Symbios SCSI

card does not have a BIOS, the Symbios SCSI card will not function. Con-

figuration options: [Auto] [Disabled]

4.4.3 PCI Configuration

PCI Configuration

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 119 120

Pas de commentaire

Asus AP3000 Manuel d'utilisateur Page 62