Asus P4B266-M Guide de l'utilisateur télécharger pdf (Page 54)

4-16

Chapter 4: BIOS Setup

BIOS Update [Enabled]

This field functions as an update loader integrated into the BIOS to supply

the processor with the required data. When set to [Enabled], the BIOS

loads the update on all processors during system bootup. Configuration

options: [Disabled] [Enabled]

PS/2 Mouse Function Control [Auto]

The default setting [Auto] allows the system to detect a PS/2 mouse at

startup. If a mouse is detected, the BIOS assigns IRQ12 to the PS/2

mouse. Otherwise, IRQ12 can be used for expansion cards. When you set

this field to [Enabled], BIOS reserves IRQ12, whether or not a PS/2 mouse

is detected at startup. Configuration options: [Enabled] [Auto]

USB Legacy Support [Auto]

This motherboard supports Universal Serial Bus (USB) devices. The

default of [Auto] allows the system to detect a USB device at startup. If

detected, the USB controller legacy mode is enabled. If not detected, the

USB controller legacy mode is disabled.

When you set this field to [Disabled], the USB controller legacy mode is

disabled whether or not you are using a USB device. Configuration

options: [Disabled] [Enabled] [Auto]

OS/2 Onboard Memory > 64M [Disabled]

When using OS/2 operating systems with installed DRAM of greater than

64MB, you need to set this option to [Enabled]. Otherwise, leave to the

default setting [Disabled]. Configuration options: [Disabled] [Enabled]

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 95 96

Pas de commentaire

Asus P4B266-M Guide de l'utilisateur Page 54