Asus P1 Guide de l'utilisateur télécharger pdf (Page 21)

2-5

ASUS Pundit P1-PH1 system

2.6 Installing a CPU

The motherboard comes with a surface mount LGA775 socket designed

for Intel

Pentium

4 processor in the 775-land package.

2.6.1 Removing the CPU fan and heatsink assembly

The system package includes a pre-installed proprietary CPU fan and

heatsink assembly to provide an efficient thermal solution to the CPU.

1. Disconnect the CPU fan cable from

the CPU fan connector on the

motherboard.

2. Loosen the CPU fan and heatsink

assembly screws.

• DO NOT replace the proprietary CPU fan and heatsink with other

models.

• Remove the memory modules first before removing the CPU fan

and heatsink assembly to avoid damaging the retaining clips of the

DIMM sockets. Refer to the next section for details on how to

remove the memory modules.

3. Lift the CPU fan and heatsink

assembly, then set aside.

You must remove the CPU fan and heatsink assembly before installing a CPU.

To remove the CPU fan and heatsink assembly:

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 87 88

Pas de commentaire

Asus P1 Guide de l'utilisateur Page 21