Asus PCI Express x1 Network Interface PEB-G21 Guide de l'utilisateur télécharger pdf (Page 38)

ASUS PEB-G21 User GuideASUS PEB-G21 User Guide

ASUS PEB-G21 User Guide

Installing the UNIX Driver Software: UnixWare/OpenUnix 8Installing the UNIX Driver Software: UnixWare/OpenUnix 8

Installing the UNIX Driver Software: UnixWare/OpenUnix 8

OverviewOverview

Overview

This procedure describes the installation procedure for the UnixWare driver. The

driver is released as an installable package in datastream format.

Installing the DriverInstalling the Driver

Installing the Driver

1. Do the following to install the bcme package on the Unixware system:

pkgadd -d <install-path>.

Where <install-path> is the full path name of the installable package bcme-

<version>.pkg.

2. After the package is installed, use netcfg or scoadmin network to add the new

network adapter.

3. When prompted, select the Line Speed and then select Advanced Option for

Flow Control, MAC Address , and Jumbo MTU Size settings, if desired. The

settings for these properties are listed below:

Line Speed

• Auto-Negotiate (default) (all speeds advertised)

1 2 ... 33 34 35 36 37 38 39 40 41 42

Pas de commentaire

Asus PCI Express x1 Network Interface PEB-G21 Guide de l'utilisateur Page 38