Asus Internet Security Router Manuel d'utilisateur télécharger pdf (Page 63)

Internet Security Router User’s Manual Chapter 9. Configuring Firewall/NAT Settings

Figure 9.1 Static NAT – Mapping Four Private IP Addresses to Four Globally Valid IP Addresses

9.2.2 Dynamic NAT

Dynamic NAT maps an internal host dynamically to a globally valid Internet address (m-to-n). The mapping

usually contains a pool of internal IP addresses (m) and a pool of globally valid Internet IP addresses (n) with

m usually greater than n. Each internal IP address is mapped to one external IP address on a first come first

serve basis. Figure 9.2 shows that PC B, C and D are mapped to a globally valid IP address respectively,

while PC A does not map to any globally valid IP address. If PC A wants to go to the Internet, PC A must wait

until a global valid IP address is available. For example, in Figure 9.3, PC B must disconnect from the Internet

first to allow PC A to access Internet.

Figure 9.2 Dynamic NAT – Four Private IP

addresses Mapped to Three Valid IP Addresses

Figure 9.3 Dynamic NAT – PC-A can get an NAT

association after PC-B is disconnected

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 166 167

Pas de commentaire

Asus Internet Security Router Manuel d'utilisateur Page 63