Asus P5E Manuel d'utilisateur télécharger pdf (Page 151)

P5E 5-43

4. The Disks item is highlighted, press <Enter> to select the hard disk drives to

congure as RAID. The following pop-up screen appears.

[ SELECT DISKS ]

[↑↓]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete

Port Drive Model Serial # Size Status

0 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk

1 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk

2 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk

3 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk

Select 2 to 4 disks to use in creating the volume.

5. Use the up/down arrow key to highlight the drive you want to set, then press

<Space> to select. A small triangle marks the selected drive. Press <Enter>

after completing your selection.

6. When the Stripe Size item is highlighted, press the up/down arrow key

to select the stripe size for the RAID 5 array, then press <Enter>.

The available stripe size values range from 4 KB to 128 KB. The default stripe

size is 64 KB.

TIP: We recommend a lower stripe size for server systems, and a higher stripe

size for multimedia computer systems used mainly for audio and video editing.

7. Key in the RAID volume capacity that you want, then press <Enter> when

the Capacity item is highlighted. The default value indicates the maximum

allowed capacity.

8. Press <Enter> when the Create Volume item is highlighted. This warning

message appears.

WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.

Are you sure you want to create this volume? (Y/N):

9. Press <Y> to create the RAID volume and return to the main menu or <N> to

go back to the Create Volume menu.

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 175 176

Pas de commentaire

Asus P5E Manuel d'utilisateur Page 151