Asus P8C WS Manuel d'utilisateur télécharger pdf (Page 75)

ASUS P8C WS

3-13

Chapter 3

According to Intel CPU spec, DIMMs with voltage requirement over 1.5V may damage the

CPU permanently. We recommend you install the DIMMs with the voltage requirement

below 1.5V.

VCCIO Voltage [Auto]

Allows you to set the VCCIO voltage. The values range from 0.90V to 1.70V with a 0.01V

interval.

VCCSA Voltage [Auto]

Allows you to set the VCCSA voltage. The values range from 0.77V to 1.60V with a 0.01V

interval.

CPU PLL Voltage [Auto]

Allows you to set the CPU PLL voltage. The values range from 1.20V to 2.20V with a 0.01V

interval.

Load-Line Calibration [Auto]

Load-line is dened by Intel VRM spec and affects CPU voltage. The CPU working voltage

will decrease proportionally to CPU loading. Higher load-line calibration would get higher

voltage and better overclocking performance, but increase the CPU and VRM thermal.

Conguration options: [Auto] [Disabled] [Enabled]

The actual performance boost may vary depending on your CPU specication.

CPU Spread Spectrum [Auto]

[Auto] Automatic conguration.

[Disabled] Enhances the BCLK overclocking ability.

[Enabled] Sets to [Enabled] for EMI control.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 139 140

Pas de commentaire

Asus P8C WS Manuel d'utilisateur Page 75