Asus P8H61-M LE R2.0 Spécifications télécharger pdf (Page 68)

2-22

Chapter 2: Getting started

2.5.4 System Agent Conguration

Memory Remap Feature [Enabled]

[Enabled] Allow you to enable remapping the memory above 4GB.

[Disabled] Disables this function.

Graphics Conguration

Primary Display [Auto]

Allows you to decide which graphics controller to use as the primary boot device.

Conguration options: [Auto] [iGPU] [PCIE] [PCI]

iGPU Memory [Auto]

Allows you to select the amount of system memory allocated to DVMT 5.0 used by the

iGPU. Conguration options: [32M] [64M] [96M] [128M] ~ [416M] [448M] [480M] [512M]

Render Standby [Enabled]

Allows you to enable the Intel

Graphics Render Standby support to reduce the iGPU

power use when idle. Conguration options: [Disabled] [Enabled]

iGPU Multi-Monitor [Disabled]

Allows you to enable or disable the iGPU Multi-Monitor. For Lucid Virtu Universal MVP

function support, set this item to [Enabled] to empower both the integrated and discrete

graphic cards. The iGPU shared memory size will be xed at 64MB.

Conguration options: [Disabled] [Enabled]

2.5.5 USB Conguration

The items in this menu allow you to change the USB-related features.

The USB Devices item shows the auto-detected values. If no USB device is detected, the

item shows None.

Legacy USB Support [Enabled]

[Enabled] Enables the support for USB devices on legacy operating systems (OS).

[Disabled] The USB devices can be used only for the BIOS setup program.

[Auto] Allows the system to detect the presence of USB devices at startup. If

detected, the USB controller legacy mode is enabled. If no USB device is

detected, the legacy USB support is disabled.

EHCI Hand-off [Disabled]

[Enabled] Enables the support for operating systems without an EHCI hand-off

feature.

[Disabled] Disables the function.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 80 81

Pas de commentaire

Asus P8H61-M LE R2.0 Spécifications Page 68