Asus P6T Manuel d'utilisateur télécharger pdf (Page 49)

ASUS P6T SE 2-29

Chapter 2

4. ICH10R Serial ATA connectors (7-pin SATA 1-6)

These connectors are for the Serial ATA signal cables for Serial ATA hard disk drives

and optical disc drives.

If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10

conguration with the Intel

Matrix Storage Technology through the onboard Intel

ICH10R RAID controller.

•

These connectors are set to Standard IDE mode by default. In Standard IDE mode,

you can connect Serial ATA boot/data hard disk drives to these connectors. If you

intend to create a Serial ATA RAID set using these connectors, set the Congure

SATA as item in the BIOS to [RAID]. See section 3.4.2 Storage Conguration for

details.

• Before creating a RAID set, refer to section 4.4 RAID congurations or the manual

bundled in the motherboard support DVD.

•

You must install Windows

XP Service Pack 1 or later version before using Serial ATA

hard disk drives. The Serial ATA RAID feature (RAID 0, 1, 5, and 10) is available only if

you are using Windows

XP SP1 or later version.

•

When using hot-plug and NCQ, set the Congure SATA as in the BIOS to [AHCI].

See section 3.4.2 Storage Conguration for details.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 111 112

Pas de commentaire

Asus P6T Manuel d'utilisateur Page 49