Asus P2B-F Manuel d'utilisateur télécharger pdf (Page 77)

ASUS P2B-L/P2B-S/P2B-LS User’s Manual 77

VIII. SCSI SELECT

Configuring SCSI

VIII. ADAPTEC SCSI SELECT

Configuring the SCSI Adapter

Access the SCSI BIOS by holding down both CTRL and A keys when you see the

BIOS banner message listing the driver name and the attached devices. For example:

Adaptec AIC-7890 SCSI BIOS v2.01

<<< Press <Ctrl><A> for SCSISelect(TM) Utility! >>>

The SCSISelect screen will come up. Instructions on how to move the cursor and

select options are listed on the bottom of the program windows.

SCSI Disk Utilities

The SCSI Disk Utilities option displays information on SCSI IDs 0 though 15, listing

all devices on the bus including non-disk devices. When you select a device from the

list and press Enter key, another window appears giving you the option of selecting

one of two sub-utilities, Format Disk or Verify Media. These utilities are used for

hard disk drives only and will have no effect on other non-disk SCSI devices.

Format Disk - low-level formats your SCSI hard disks. In general, SCSI hard disks

have already been low-level formatted when you get them, so you generally do not

need to use this function.

Verify Media - scans the selected drive media for defects, notifies you of any de-

fects found and gives you the option of reassigning bad blocks so that data will not

be written to them. This utility is only necessary if you suspect that your SCSI disk

drive has a problem.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 87 88

Pas de commentaire

Asus P2B-F Manuel d'utilisateur Page 77