Asus CUV266-D Manuel d'utilisateur télécharger pdf (Page 19)

ASUS CUV266-D User’s Manual 19

3. HARDWARE SETUP

3. H/W SETUP

Motherboard Settings

4) Keyboard Wake-up (3-pin KB_PWR)

This jumper allows you to enable or disable the keyboard wake up feature. Set

this jumper to ENABLED if you wish to use the keyboard to wake up the

computer when you press the<Spacebar>. This feature requires an ATX power

supply that can supply at least 1A on the +5Vsb lead. This default setting is

DISABLED.

3) USB Device Wake-up (3-pin USB01_PWR/USB23_PWR/USB45_PWR)

These jumpers allow you to enable or disable the USB wake-up feature on the

motherboard. Set all the three jumpers to ENABLED if you wish to use the USB

devices to wake up the computer. This feature requires an ATX power supply

that can supply at least 1A on the +5VSB lead. The default setting for all three

jumpers is DISABLED .

NOTES:

1. Before setting these jumpers to ENABLED, make sure that you have the

appropriate power supply, otherwise the computer does not power up.

2. The total current consumed must NOT exceed the power supply capability

(+5VSB) whether under normal working conditions or in sleep mode.

CUV266-D

0 10 10 10 1

CUV266-D USB Device Wake-Up

USB01_PWR

USB45_PWR

USB23_PWR

EnabledDisabled

(Default)

CUV266-D

0 10 10 10 1

CUV266-D Keyboard Power Up

KB_PWR

Enabled

Disabled

(Default)

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 87 88

Pas de commentaire

Asus CUV266-D Manuel d'utilisateur Page 19