Asus Striker II Extreme Manuel d'utilisateur télécharger pdf (Page 82)

4-4 Chapter 4: BIOS setup

To update the BIOS using EZ Flash 2:

 

the motherboard.

 

3. You can launch the EZ Flash 2 by two methods.

 

Press <Alt> + <F2> during POST to display the following.

4.1.2 ASUS EZ Flash 2 utility

The ASUS EZ Flash 2 feature allows you to update the BIOS without having to

go through the long process of using a DOS-based utility. The EZ Flash 2 utility

is built-in the BIOS chip so it is accessible by pressing <Alt> + <F2> during the

Power-On Self Tests (POST).

(2) Enter BIOS setup program. Go to the Tools menu to select EZ Flash2

and press <Enter> to enable it.

 

is found. Then press <Enter>.

ASUSTek EZ Flash 2 BIOS ROM Utility B327

FLASH TYPE: Winbond W39V080A 8Mb LPC

BOARD: STRIKER II EXTREME

VER: 0106

DATE: 01/18/2008

Current ROM

Update ROM

BOARD: Unknown

VER: Unknown

DATE: Unknown

PATH: A:\

Note

[Enter] Select [S] Save [ESC] Exit

[Tab] Switch [Up/Down/Home/End] Move

 with

FAT 32/16/12 format only.

• Do not shut down or reset the system while updating the BIOS to prevent

system boot failure!

 

process and automatically reboots the system when done.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 195 196

Pas de commentaire

Asus Striker II Extreme Manuel d'utilisateur Page 82