Asus M3N-HT Deluxe/Mempipe Manuel d'utilisateur télécharger pdf (Page 169)

ASUS M3N-HT Deluxe Series 5-45

For Windows

XP, if you want to boot the system from a hard disk drive





Refer to section “5.5 Creating a RAID driver disk” for details.

Setting the BIOS RAID items

After installing the hard disk drives, make sure to set the necessary RAID items in



To set the BIOS RAID items:

1. Boot the system and press <Del> during the Power-On Self-Test (POST) to

enter the BIOS Setup Utility.

2. Set the

SATA Operation Mode

item to [RAID]. See section

4.4.6 Onboard

Device Conguration > MCP Storage Cong

for details.

Due to chipset limitation, when you set any of the SATA ports to RAID mode, all

SATA ports run at RAID mode simultaneously.

3. Save your changes and Exit Setup.

5.4.2 NVIDIA

RAID congurations

The motherboard includes a high performance SATA RAID controller integrated in

the NVIDIA

nForce™ 780a SLI southbridge chipset. It supports RAID 0, RAID 1,

RAID 0+1, RAID 5 and JBOD for six independent Serial ATA channels.

Installing Serial ATA (SATA) hard disks

The motherboard supports Ultra DMA 133/100/66 and Serial ATA hard disk drives.

For optimal performance, install identical drives of the same model and capacity

when creating a disk array.



1. Install the SATA hard disks into the drive bays.

2. Connect the SATA signal cables.

3. Connect a SATA power cable to the power connector on each drive.

Refer to the RAID controllers user manual in the motherboard support DVD for



1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 191 192

Pas de commentaire

Asus M3N-HT Deluxe/Mempipe Manuel d'utilisateur Page 169