Asus A7V Manuel d'utilisateur télécharger pdf (Page 40)

40 ASUS A7V User’s Manual

Connectors

3. H/W SETUP

3. HARDWARE SETUP

19) ATX Power Supply Connector (20-pin block ATXPWR)

This connector connects to an ATX power supply. The plug from the power sup-

ply will only insert in one orientation because of the different hole sizes. Find the

proper orientation and push down firmly making sure that the pins are aligned.

IMPORTANT: Make sure that your ATX power supply can supply at least 10mA

on the +5-volt standby lead (+5VSB). You may experience difficulty in power-

ing ON your system if your power supply cannot support the load. For Wake-

On-LAN support, your ATX power supply must supply at least 720mA +5VSB.

A7V ATX Power Connector

ATX

+3.3Volts

-12.0Volts

Ground

Power Supply On

Ground

-5.0 Volts

+5.0 Volts

Power Good

+12.0Volts

+3.3 Volts

Ground

+5.0 Volts

Ground

+5.0 Volts

Ground

+5V Standby

0 1

A7V

20) Power Supply Thermal Sensor Connector (2-pin block JTPWR)

If you have a power supply with thermal monitoring, connect its thermal sensor

cable to this connector.

A7V Power Supply Thermal Sensor Connector

0 1

A7V

JTPWR

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 99 100

Pas de commentaire

Asus A7V Manuel d'utilisateur Page 40