Asus Terminator P-III Manuel d'utilisateur télécharger pdf (Page 17)

ASUS Terminator Barebone System 17

2.3 Install a CPU

3. Position the CPU above the

socket such that its notched

or marked corner matches the

Socket Pin 1, while making

sure that the CPU is parallel

to the socket.

4. Carefully insert the CPU into

the socket until it fits in place.

WARNING!

The CPU fits only in one orientation. DO NOT force the CPU into

the socket to prevent bending the pins and damaging the CPU. If

the CPU does not fit completely, check its orientation or check for

bent pins.

Socket Pin 1

Notched Corner

5. Push down the lever to secure

the CPU. The lever clicks in

place indicating that the

socket is locked.

6. Connect the CPU fan cable to

the 3-pin CPU_FAN connector

on the motherboard. Refer to

the picture in step 1.

CPU Fan Cable

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 33 34

Pas de commentaire

Asus Terminator P-III Manuel d'utilisateur Page 17