Asus Terminator A7VT Manuel d'utilisateur télécharger pdf (Page 78)

Chapter 5: BIOS information

DRAM Clock [By SPD]

Sets the DRAM frequency. Configuration options: [By SPD] [133 MHz]

[166 MHz]

DRAM Timing [Auto by SPD]

The DRAM clock is set according to DRAM SPD (Serial Presence Detect).

Select [Auto by SPD] for automatic DRAM clock detection. Select [Manual]

to set the DRAM Timing manually. Select [Safe] to set the DRAM timing to

safe value. Configuration options: [Auto by SPD] [Manual] [Safe]

DRAM Burst Length [4]

Sets the DRAM burst length width. Configuration options: [4] [8]

DRAM Command Rate [2T Command]

Sets the DRAM command rate .

Configuration options: [1T Command] [2T Command]

Write Recovery Time [3T]

Sets the DRAM write recovery time. Configuration options: [2T] [3T]

tWTR [2T]

Sets the tWTR time. Configuration options: [1T] [2T]

5.4.2 Memory configuration

The items in this menu show the memory configuration settings. Select an

item then press <Enter> to display a pop-up menu with the configuration

options.

Select Menu

Item Specific Help

Set DRAM Frequency.

Memory Configuration

x DRAM CAS Latency 2.5

x Bank Interleave Disabled

x Precharge to Active (Trp) 5T

x Active to Precharge (Tras) 7T

x Active to CMD (Trcd) 5T

Current DRAM Frequency 133 MHz

DRAM Clock [By SPD]

DRAM Timing [Auto by SPD]

DRAM Burst Length [4]

DRAM Command Rate [2T Command]

Write Recovery Time [3T]

tWTR [2T]

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 97 98

Pas de commentaire

Asus Terminator A7VT Manuel d'utilisateur Page 78